manualshive.com logo in svg

AMD PCM-5862, Manual, Page: 38 / 99

Share
Download
AMD PCM-5862 Manual Download Page 38

32

PCM-5862 User‘s Manual

Introduction

The PCM-5862 system BIOS and custom drivers are located in a
128 Kbyte, 32-pin (JEDEC spec.) Flash ROM device, designated
U19. A single Flash chip holds the system BIOS, VGA BIOS, and
network Boot ROM image. The display can be configured via
software. This method minimizes the number of chips and eases
configuration. You can change the display BIOS simply by
reprogramming the Flash chip.

Utility disk

The PCM-5860 is supplied with a software utility disk. This disk
contains the necessary files for setting up the VGA display.
Directories and files on the disk are as followed:

Root

README.DOC

AMIFLASH.EXE

5862_SYS.BIN

5862_CRT.BIN

5862_TFT.BIN

5862_STN.BIN

5862_MON.BIN

5862_EL.BIN

CBROM.EXE

AMIFLASH.EXE

This program allows you to write the VGA display driver files to
the BIOS Flash ROM. The VGA files all come ready formatted for
the PCM-5862 with .BIN extensions. They are custom written and
can be made available upon request.

5862_SYS.BIN

This binary file contains the system BIOS

Summary of Contents for PCM-5862




































































































Reviews:

No comments