AMD PCM-5862, Manual, Page: 23 / 99

Chapter 2 Installation 17
Buzzer enabled/disabled (J7)
Buzzer enabled/disabled
*Enabled Disabled
J7
* default setting
Installing DRAM (SIMMs)
The PCM-5862 CPU card provides two 72-pin SIMM (Single In-
line Memory Module) sockets and supports either Fast Page Mode
(FPM) or Extended Data Output (EDO) DRAM with a speed of 70
ns or faster. You can install from 8 MB to 128 MB of RAM.
Installing SIMMs
NOTE: The modules can only fit into a socket one way.
Their chips must face the CPU, and their gold pins
must point down into the SIMM socket.
1. Ensure that all power sources are disconnected.
2. Slip the memory module into the socket at a 45-degree angle.
3. Push the module toward the vertical posts at both ends of the
socket until the module is upright, and the retaining clips at
both ends of the module click into place. When positioned
correctly, the pins on top of the vertical posts should
correspond to the circular holes on the ends of the module.
4. Repeat steps 2 and 3 for each module you install.