manualshive.com logo in svg

AMD PCM-5862, Manual, Page: 3 / 99

Share
Download
AMD PCM-5862 Manual Download Page 3

Contents

Chapter 1

General Information .................................... 1

Introduction......................................................................... 2
Highly integrated multi-media SBC....................................... 2
Features ............................................................................... 3
Specifications....................................................................... 3
Board layout and dimensions.............................................. 5

Chapter 2

Installation ..................................................  7

Jumpers ............................................................................... 8
Connectors........................................................................... 9
Locating jumpers ................................................................ 9
Locating connectors .......................................................... 10
Setting jumpers ................................................................. 12
CPU installing and upgrading .......................................... 13
Install a CPU in the ZIF socket............................................ 13
System clock setting (J1, J2, and J4).................................... 14
CPU voltage setting (J3)...................................................... 15
M1 cache linear mode setting (J5) ....................................... 16
CMOS clear (J6) ................................................................. 16
Buzzer enabled/disabled (J7) ............................................... 17
Installing DRAM (SIMMs) ............................................... 17
Installing SIMMs ................................................................ 17
IDE hard drive connector (CN17) .................................... 18
Connecting the hard drive.................................................... 18
Floppy drive connector (CN18)......................................... 19
Connecting the floppy drive ................................................ 19
Parallel port connector (CN19)......................................... 20
Keyboard and PS/2 mouse connector (CN15) .................. 20
Front panel connector (CN7) ............................................ 20
Power connectors (CN6, CN10, CN14)............................. 21
Peripheral power connector, -5V, -12V (CN10)................... 21
Main power connector, +5V, +12V (CN14)......................... 21

Summary of Contents for PCM-5862




































































































Reviews:

No comments