AMD GA-M61PM-S2 User Manual Download Page 38

Page: 38 / 80

GA-M61PM-S2 Motherboard

- 38 -

English

Onboard Serial Port 2

Auto

BIOS will automatically setup the port 2 address.

3F8/IRQ4

Enable onboard Serial Port 2 and address is 3F8/IRQ4.

2F8/IRQ3

Enable onboard Serial Port 2 and address is 2F8/IRQ3. (Default value)

3E8/IRQ4

Enable onboard Serial Port 2 and address is 3E8/IRQ4.

2E8/IRQ3

Enable onboard Serial Port 2 and address is 2E8/IRQ3.

Disabled

Disable onboard Serial port 2.

Onboard Parallel Port

Disabled

Disable onboard LPT port.

378/IRQ7

Enable onboard LPT port and address is 378/IRQ7. (Default value)

278/IRQ5

Enable onboard LPT port and address is 278/IRQ5.

3BC/IRQ7

Enable onboard LPT port and address is 3BC/IRQ7.

Parallel Port Mode

SPP

Using Parallel port as Standard Parallel Port. (Default value)

EPP

Using Parallel port as Enhanced Parallel Port.

ECP

Using Parallel port as Extended Capabilities Port.

ECP+EPP

Using Parallel port as ECP and EPP mode.

ECP Mode Use DMA

This option is available only when

Parallel Port Mode

is set to ECP or ECP+EPP.

Set ECP Mode Use DMA to 3. (Default value)

Set ECP Mode Use DMA to 1.

On-Chip USB

V1.1+V2.0

Enable the USB 1.1 and USB 2.0 controllers. (Default Value)

V1.1

Enable only the USB 1.1 controller.

Disabled

Disable the onboard USB controller.

USB Keyboard Support

Enabled

Enable USB keyboard support.

Disabled

Disable USB keyboard support. (Default value)

USB Mouse Support

Enabled

Enable USB mouse support.

Disabled

Disable USB mouse support. (Default value)

Legacy USB storage detect

This option allows users to decide whether to detect USB storage devices, including USB flash
drives and USB hard drives during POST.

Enabled

BIOS will scan all USB storage devices. (Default value)

Disabled

Disable this function.

Summary of Contents for GA-M61PM-S2

















































































Search results

Summary of Contents for GA-M61PM-S2

Reviews:

Related manuals for GA-M61PM-S2

Brands by name

Popular brands

AMD GA-M61PM-S2, User Manual

Search results

Summary of Contents for GA-M61PM-S2

Reviews:

Related manuals for GA-M61PM-S2

Brands by name

Popular brands