Display Configuration Card Connection Used
DisplayPort display
DisplayPort connection
DFP (DVI) display
DisplayPort connection with DisplayPort-to-DVI adapter (single- or dual-link)
HDMI™ display
DisplayPort connection with DisplayPort-to-HDMI adapter
CRT (VGA) display
DisplayPort connection with DisplayPort-to-VGA adapter
Note:
One DisplayPort-to-DVI (single-link) adaptor is included with your AMD
FirePro™ S9000 graphics card. Additional adaptors must be purchased separately.
3.3 Using Adapters
Your AMD FirePro graphics card product includes adapters to enable you to attach
display types other than those included on the baseplate or cables.
Use the following procedure to attach a display using an adapter.
1.
Turn off your computer and monitor.
2.
Plug the adapter into the connection from the baseplate of your AMD FirePro
product and tighten the thumbscrews (if there are any).
3.
Connect your display's cable to the adapter and tighten the thumbscrews (if
there are any).
4.
Turn on your display first, then your computer.
Use the Control Center application to configure the new display, should you need to
do so.
8 Display Configuration
AMD FirePro™ S9000
©
2012
Advanced Micro Devices Inc.
