Maintain a good posture.
Always unplug the motor connector
:
Because of the danger of injury, never place your hand or any object
near the rotating parts.
Operate your model in a relaxed and courteous manner.
Fatigue from continuous operation over a long period of time
can lead to impaired judgement and unexpected accidents.
Always take sufficient rest periodically.
Maintain a save distance between yourself and the helicopter
while operating.
Always operating the helicopter within the limits of your ability.
Unreasonabl e maneuvers can lead to accidents and injury.
AFTER OPERATING THE HELICOPTER
Be sure to check the following items:
Always conduct lubrication and part replacement as descibed
in the operating manual.
Do not operate while sitting or lying on the ground.
*
It is easy to lo se your footing on slopes. Please take care.
*
Durin g any other potentially dangerous situation.
*
When the helicopter body replacing parts, or when unusual
noise or vibrations occur.
*
When attaching or replacing parts.
*
When adjusting the helicopter body or transmitter.
*
Because of the danger of burns, do not touch the motor after starting or
immediately after stopping the motor.
.
*
Wipe clean any oil, dirt or water.
*
Check each section of the h
elicopter, and tighten or replace
screws as necessary.
*
*
*
*
WHILE INFLIGHT
Summary of Contents for Cybercopter
