29
Yes: Let the operating system configure Plug and Play devices, not required for boot if
your system has a Plug and Play system.
Allocate IRQ for PCI VGA
The optional settings are: No; Yes.
Yes: Assigns IRQ to PCI VGA card if card requests IRQ.
No: Does not assign IRQ to PCI VGA card even card requests an IRQ.
Palette Snooping
The optional settings are: Enabled; Disabled.
Enable: inform the PCI device that an ISA graphics devices is installed in the system
so the card will function correctly.
PCI IDE Bus Master
The optional settings are: Enabled; Disabled.
Enable: BIOS uses PCI busmastering for reading/writing IDE devices.
Offboard PCI/ISA IDE Card
Some PCI IDE cards may require this to be set to the PCI slot number that is holding
the card.
Auto: Works for most PCI IDE cards.
3-10 PC Health Status
This section shows the Status of you CPU, Fan, and Warning for overall system status.
This is only available if there is Hardware Monitor onboard.
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
PC Health Status
Help Item
PC Health Status
Smart FAN Configuration Press Enter
H/W Health Function Enabled
CPU Temperature: 59
°
C/138
°
F
System Temperature: 40
°
C/104
°
F
CPUFAN Speed: 2923RPM
SYSFAN1 Speed: N/A
SYSFAN2 Speed: N/A
VLDT 1.160v
VDIMM 1.599V
Vcore 1.360v
VNB 1.160V
↑↓
: Move Enter: Select +/-/: Value F10: Save ESC: Exit F1: General Help
F5: Discard Charges F6: Standard Defaults F7: Optimized Defaults
H/W Health Function,
It displays information list below when set as below. The choice is either Enabled or
Disabled.
CPU Temperature/ System Temperature/ CPUFAN1 Speed /SYSFAN1
Speed/SYSFAN2 Speed/VLDT/VDIMM/VCore/VNB
This will show the CPU/ /System voltage chart and FAN Speed, etc.