27
Onboard PCIE Lan
Use this item to enable or disable Onboard PCIE Lan
HD Audio Azalia Device
This item allows you to decide to enable/disable the chipset family to support HD
Audio. The optional settings are: Auto; Enabled and Disabled.
USB Configuration
Press Enter to set values for sub-items as: Legacy USB Support, USB 2.0 Controller
Mode BIOS EHCI Hand-OFF and so on.
3-7-3
Super IO Configuration
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
Super IO Configuration
Configure F71863 Super IO Chipset
Help Item
Power On By Keyboard Disabled
Power On By Mouse Disabled
Onboard Floppy Controller Enabled
Serial Port 1 Address 3F8/IRQ4
Serial Port 2 Address 2F8/IRQ3
Serial Port 2 Mode IrDA (1.6 US)
IR Duplex Mode Half Deplex
IRTX pin Select Normal
IRRX Select Normal
IR TX to RX Delay Select No Delay
IR RX to TX Delay Select No Delay
PWRON After PWR-Fail Always OFF
Allows BIOS to Enable or Disable
Floppy Controller
↑↓
: Move Enter: Select +/-/: Value F10: Save ESC: Exit F1: General Help
F5: Discard Charges F6: Standard Defaults F7: Optimized Defaults
Serial Port1 /2 Address
Use this item to select serial port address for serial port one.
Serial Port2 Mode
Allows BIOS to Select mode for Serial Port2.
IR Duplex Mode
This item allows BIOS to select full or half duplex for serial port 2 (IR Mode). The
optional settings are: Full Duplex; Half Duplex.
IrTX Pin Select
The optional settings are: Normal and Inverse.
This item allows BIOS to select transmit pin in a normal condition or inverse the
IRTX(IR Mode).
IrRX Pin Select
The optional settings are: Normal and Inverse.
This item allows BIOS to select receiver pin in normal condition or inverse the
IRRX(IR mode).
IRTX to RX Delay Select
The optional settings are: No Delay and Reception Delay.
This item allows BIOS to select IR from TX to RX 4 characters time delay for serial
port2(IR mode)
IRRX to TX Delay Select
The optional settings are: No Delay and Transmission Delay.