7
Physical Installation
Step 1:
Place the installation template sticker on the mounting surface. Then, using a drill, drill 3 installation holes.
Note:
Use a 1"
paddle bit in the center of the installation template if you are running the cables through the mounting surface.
Step 2:
Place the included wall anchors into the installation holes.
Step 3:
Align the holes on the installation bracket to the installation holes. Also make sure to align the "
Front
" and "
Up
" portions of
the bracket to the installation sticker.
Insert the screws and using a Phillips head screwdriver, secure the installation bracket to the mounting surface.
Step 4:
Run the wires of the camera through the mounting surface and attach the bottom of the camera to the installation bracket.
The "
Front
" tab should align to the notch on the bottom of the camera. Push the camera forward to lock it onto the installation
bracket.
