AMCI NEXUS NX2A4E2, User Manual

Page: 6 / 76

A
BOUT THIS
M
ANUAL
NX2A4E2 User Manual
ADVANCED MICRO CONTROLS INC.
6
Manual Conventions (continued)
The following table shows the text formatting conventions:
Where To Go From Here
You will most likely read this manual for one of two reasons:

If you are curious about the NX2A4E2 Resolver Interface Module from AMCI, this manual contains
the information you need to determine if these product is the right one for your application. The first
chapter,
NX2A4E2 Introduction contains all of the information you will need to fully specify the right
product for your application.

If you need to install and use the NX2A4E2 Resolver Interface Module, then the rest of the manual is
written for you. To simplify installation and configuration, the rest of the manual is broken down into
references and tasks . Using this product requires you to complete multiple tasks, and the manual is bro-
ken down into sections that explain how to complete each one.
Format Description
Normal Font Font used throughout this manual.
Emphasis Font Font used the first time a new term is introduced.
Cross Reference
When viewing the PDF version of the manual, clicking on
the cross reference text jumps you to referenced section.
HTML Link
When viewing the PDF version of the manual, clicking on
the link will connect you with the www.amci.com website.
Chapter Title Page Intended Audience
NX2A4E2 Introduc-
tion
7
Anyone new to the NX2A4E2. This chapter gives a basic overview
of the features available on the unit, typical applications, and spec-
ifications.
Data Formats 17
Anyone that needs detailed information on the data formats used
by the NX2A4E2 to communicate with its host controller.
Configuring Network
Interfaces
29
Basic information on configuring a PC or laptop to successfully
communicate with an NX2A4E2 to set its IP address.
Installing the
NX2A4E2
31
Anyone that must install an NX2A4E2 on a machine. Includes
information on mounting, grounding, and wiring specific to the
units.
Set the IP Address
and Protocol
43
Anyone that needs to change the IP address or communications

protocol used by the NX2A4E2.
Installing an EDS
File
53
Anyone that needs information on installing an EDS file for use on
EtherNet/IP systems. An Allen-Bradley controller is used as an
example.
EtherNet/IP Implicit
Communications
57
Anyone that needs information on configuring Implicit Messaging
on an EtherNet/IP system. An Allen-Bradley controller is used as
an example.
EtherNet/IP Explicit
Messaging
61
Anyone that needs information on configuring Explicit Messaging
on an EtherNet/IP system. An Allen-Bradley controller is used as
an example.
Modbus TCP
Configuration
67 Anyone using Modbus TCP to communicate with the NX2A4E2.
PROFINET Network
Configuration
71
Anyone using PROFINET to communicate with the NX2A4E2. A
Siemens SIMATIC controller is used as an example.