12
AMC VIBRATION SENSOR / ©AMC VIBRO Sp. z o.o.
4.2.
Technical specification
Table 2. Technical parameters of the AVM GATEWAY
Parameter
Description
Power supply
24 VDC (range 12-36 VDC 24 W)
Size
106 x 187 x 56 mm
Weight
735 g
IP rating
IP67
Temperature range
-20°C to +80 °C
Ethernet channel
M8 4-pin connector
RJ45 for 10/100 Base-T Ethernet
IT and networks
TCP/IP (HTTP, OPC UA, Modbus)
Maximal number of transmitters
Up to 32x AVS 2000R SENSOR
Radio
ISM 868 MHz (Europe) / 915 MHz (USA)
SENSOR network configuration
GATEWAY Website
Mechanical installation
This section presents the dimensions and method of mechanical installation of the AVS 2000R and
the AVM GATEWAY modules.
5.1.
AVS 2000R housing
1. Choose a mounting position on the machine housing.
a. Choose what type of mount you should use. Refer to the machine warranty information to
verify which housing is suitable
drilling a mounting hole or using an adhesive mounting pad.
b. Provide enough space to install the sensor.
c. Define a place for optimal radio frequency connectivity.
2. Prepare the mounting position.
a. Prepare a clean surface. Use a steel brush to remove dirt or paint / corrosion protection lareys
from the mounting surface.
b. Prepare the mounting site.
3. Set the axis of the sensor as intended to the axis of the acceleration being monitored.
4. The maximal dimensions of the AVS 2000R module are 65 x 137 x 65 mm. The housing has a M8 screw
30 mm long, which is used to screw the sensor to the target object. The screw should be screwed to a
depth of 9 mm and then tightened to the hole with two attached nuts.
