40
AMC VIBRATION SENSOR / ©AMC VIBRO Sp. z o.o.
Figure 36. Wake up the Vibration sensor
7.
All modules present in the network assigned to the GATEWAY are visible in the Overview field.
To set the device in the storage mode, you can hold the magnet in the same place as in the
figure 36 for about 5 seconds until the LED light starts to blink quickly. Then just put the
magnet away. Then LED light will stop blinking and the device will be in storage mode. To exit
the storage mode, an operator must hold the magnet for a second in the same place as before
(figure 36) until the LED lights up.
Figure 37. Removal of the AVS 2000R from the network
