3
AV CONDITIONER 1000 / ©AMC VIBRO Sp. z o.o.
1.
Introduction
AV CONDITIONER 1000
(AVC 1000) is a universal conditioner designed to interface with sensors made
in the ICP/IEPE standard.
Thanks to its small size and weight, robust design, very good operational parameters and ease of use, it
is ideally suited for carrying out measurements both in the laboratory and in the field.
The conditioner is equipped with input circuits enabling powering up the ICP/IEPE sensor, while
maintaining wide frequency response, very good linearity and low noise. Is also equipped with an LED
indicating open or short circuit in the sensor loop.
The device can be powered up either by an adapter or an internal battery pack 4xAAA.
2.
Technical data
Parameters
number of channels
1
input type
ICP/IEPE 24V DC / 2,4 mA
input / output connector
BNC / BNC
input impedance
100 kΩ
output impedance
120 Ω
gain
1x (0 dB)
gain error
< 0,1%
gain drift
< 5 ppm /°C
output range
±10V
offset
< 10 mV
SNR
> 90 dB
frequency range (- 3 dB)
0,16 Hz – 100 kHz *
power supply
9V DC/100 mA
batteries
4 x AAA
dimensions
60 x 100 x 30 mm
weight
225 g
operating temperature
0°C - 60°C
storage temperature
-10°C – 70 °C (without batteries)
*) optional 500 kHz
