Ambrell 3542, Manual

Page: 12 / 75

Introduction 12
Precision Induction Heating
A
MBRELL
®
Doc#801-9526-00.doc
Work-coil or reference coil (included with the unit)
A reference coil is included with your work head to ensure basic operation; while it is
suitable for use in heating, another coil may have been ordered for your use.
If you are attaching your own coil:

use 4mm Allen key to remove
the 4 screws securing the
reference coil

remove reference coil and
retain 2 O-rings from coil
mounting plate

re-use or use new O-rings [PN
117-0021]; insert in recessed
face of work head
 secure coil with 4 screws
provided; tighten
Rack/panel Mounting
Your E
ASY
H
EAT
is mountable in your panel or 19” rack (4U); observe these steps and
requirements:
 unscrew/remove 4 rubber feet on unit base

(panel) provide cutout and mounting pattern per above; plan for M5 or M6 screws
 ensure that rear of unit is supported when mounted
 provide at least 736mm (29”) depth to permit water and AC power cable bend
 secure unit with M5 or M6 hardware
2.375 (60.3)
18.3 (465)
2.25 (57)
17.5 (445)
7.1 (180)
Not to scale; inch (mm) panel cutout
0.5 (12)
1.437 (36.5)
4.00 (102)
6.89 (175)
0.40 (10)