AMBISONIC LANDSCAPE COLLECTION™
9
5B. ADDING SEALANT, BEFORE SLEEVE ASSEMBLY
Polyurethane Sealant:
It is strongly recommended that Polyurethane Sealant be applied
between the Sleeve & the Subwoofer Base. Care should be taken to apply a liberal 1/4''
bead of Polyurethane Sealant along the Port Tube Base of the Subwoofer, before assem-
bling the sleeve over the Port Tube. On each Bollard, this bead will lay on the outer edge
surrounding the Round/Square Bottom Bracket. Ensure that the caulking sealant is fully
cured, before burying the sub. This will improve weather resistance.
Origin Acoustics
®
No Sleeve
3
Now, the Round Sleeve should slide smoothly over the Mid-Range/Tweeter Port Tube, into
the Port Hole Base. Ensure the 2 punched holes at the bottom of the sleeve align with the 2
round grooves, (Snap-Fit Latches), on the base of the Port Hole on the Subwoofer. Once the
sleeve slides down far enough, the 2 Snap-Fit Latches will snap & grip the sleeve. Now, use
the 2 Type A Screws (Phillips Flat Head), included in the packaging, with a Phillips screw
driver to secure the sleeve to the structure.
(See Diagram 5C • STEPS 1 | 2 | 3 | 4 • Page 10)
.
See Diagram 5B above, on adding Polyurethane Sealant, as recommended.
5C. ROUND SLEEVE ASSEMBLY
