AMBISONIC LANDSCAPE COLLECTION™
6
•
Flat Head Screwdriver
•
Phillips Screwdriver [Min 10'' Length]
OR Electrical Drill
with Elbow Attchment
•
Shovel
4. REQUIRED TOOLS
5. BOLLARD UNIT ASSEMBLY
5A. MID-RANGE/TWEETER PORT-TUBE ASSEMBLY
Secure the Mid-Range/Tweeter Port-Tube into the Port Hole of the Subwoofer, by lining up
the VERTICAL Silver Line markings with the protruding vertical “Dimple Line” on the rubber
trim surrounding the Port Hole edges. If needed, you may twist the Port Tube, back & forth
(DO NOT PUSH DOWN VERTICALLY), so that it can slide in smoothly into the Port Hole.
Once aligned, it will slide down the Port Hole until the HORIZONTAL Silver Line markings
meet the VERTICALLY EXTRUDED RUBBER TRIM on the Port Hole edge.
(See Diagram 5A
• STEPS 1 | 2 | 3 • Page 7)
Then, use a Flat-Head Screwdriver to secure the Port-Tube in place by tightening the 2 Metal
Tie-Clasps around the base of the Port Hole on the Subwoofer.
(See Diagram 5A • STEP 4 •
Page 8)
. Lastly, the Speaker Cable protruding from the Subwoofer can be connected with
the Speaker Cable from the the Mid-Range/Tweeter.
(See Diagram 5A • STEP 5 • Page 8)
The Bollard comes in two individual packages;
1) Subwoofer
2) Mid-Range/Tweeter with Port-Tube and Sleeve
To assemble these, it will depend on which shape of sleeve you have purchased.
