Ambir ImageScan Pro 930u, User Manual

Page: 31 / 46

31
C
HAPTER
III.
C
ARE AND
M
AINTENANCE
Your scanner is designed to be maintenance-free. However, timely care
and maintenance can keep your scanner working smoothly
.
Cleaning the Scanner
Paper powder, dust, ink and toner from paper being scanned may make
the inner ADF dirty, which leads to poor image quality or document-feeding
errors. How often to clean your scanner depends on the type of paper and
number of pages being scanned over time. In business environments, monthly
maintenance
may be appropriate. For more information, visit
http://www.ambir.com/care
Perform the following procedures to clean the scanner surface and the ADF
unit. Gently wipe locations described below. Do not rub too hard.
Warning

Before cleaning the scanner, turn off
the scanner and disconnect the
scanner’s power cable and USB cable,
and then wait a few minutes for the
glass and/or the inner ADF to cool to
room temperature.

Wash your hands with soap and water
after cleaning the scanner.
Cleaning Materials
Have the following cleaning materials ready to clean the scanner:

soft, dry, lint-free cloth (or a cotton swab)

non-abrasive cleaner —Isopropyl alcohol (95%). DO NOT use water.

Alternatively, you can use glass cleaner or neutral detergent for
window cleaning to clean the scanner glass.

However, DO NOT use either of these to clean the ADF feed roller or
pad module.
Use of other cleaning materials could damage your scanner and void the
warranty.