Ambir ImageScan Pro 930u User Manual Download Page 10

Page: 10 / 46

14.

USB PORT—Connects the scanner to a USB port on your computer by the
included USB cable.

15.

POWER RECEPTOR—Connects the scanner to a standard AC power outlet
by the included AC adapter.

16.

POWER SWITCH—Use this to turn the scanner ON or OFF.

LED

NDICATOR

The Power/Power Saving LED and Warning LED indicate different scanner

status.

Warning LED

Light

Power / Power

Saving LED

Light

Status

Off

White

The scanner is turned on, ready to scan images.

Off

Orange

The scanner is in standby mode (sleep mode). It
will enter this mode if it is idle for 10 minutes.

Red

Blinking White

The ADF cover is opened.

Blinking Red

White

Paper jam.

Blinking Red

Off

An internal component of the scanner may have
malfunctioned.

Off

The scanner is off, either because the power is not
turned on, or because the AC adapter is not
properly plugged into an AC power outlet.

Summary of Contents for ImageScan Pro 930u















































Search results

Summary of Contents for ImageScan Pro 930u

Reviews:

Related manuals for ImageScan Pro 930u

Brands by name

Popular brands

Ambir ImageScan Pro 930u, User Manual

Search results

Summary of Contents for ImageScan Pro 930u

Reviews:

Related manuals for ImageScan Pro 930u

Brands by name

Popular brands