- 5 -
Install Scanner hardware
a)
Connect the USB cable (provided) to your computer and scanner. (Fig. 1)
b)
Make sure the red warning label is removed before connecting this end to your computer.
c)
You may need to reconnect the cable to another USB port on your computer if the scanner
cannot be detected. (Check your computer’s user guide to identify other available USB ports
and their locations.
Fig. 1
Fig. 2
Fig. 3
d)
Once your scanner is connected to your computer, the “Found New Hardware Wizard” window
will appear. Choose the “No. not this time” then click “Next”. (Fig.2)
e)
Make sure you select the “Install the software automatically (Recommended)” option in the
second screen that follows. (Fig. 3)
