14
www.ambient.de
Select after what time the display shuts off after
entering the main operation display.
Choices are:
Never – 5 seconds – 30 seconds – 1 minute – 5 minutes
Select by toggling the config switch left/right. Push in to select value.
SYS>CONFIG>BNC
Determine the output impedance for the video
sync signal:
Single: 75 Ohms for connecting to one video camera’s genlock input.
Dual/3D: 37.5 Ohms for splitting to two cameras’ genlock input.
Select by toggling the config switch left/right. Push in to select mode.
SYS>INFO
Select INFO to display information about the
ACL204:
Serial Number
Main firmware version
FPGA firmware version
Mac address
