3
www.ambient.de
2.
Package Contents
-
ACL204 synchronizer
-
ACL-T204, protective leather pouch
-
LTC-OUT cable, Lemo JGG.305 to BNC right angle connector
-
BNC cable, BNC to BNC right angle connector
-
Manual
3.
Safety instructions
-
Do not expose to humidity
-
Do not connect signal outputs to microphone inputs with phantom power engaged
-
Only operate with adequate power sources
-
Always remove batteries when not in use
4.
Powering
The ACL 204 can be powered:
-
by 2 pcs. AA batteries (Alkaline, NiMH rechargeable or Li-Ion). Set correct battery
type in configuration for reliable low voltage warning.
Pay attention to insert with correct polarity as shown on label, insert outer with “+”
first, inner with “-“ first. Push down battery hinge and close slider.
-
5 to 18 Volts DC via pin 4 of Lemo “A” socket
-
5 Volts DC via the USB socket. If powered via the USB socket, the power switch is
bypassed
Note: current time code is lost when power is removed. The settings are stored, the unit will
power up with the last configuration used. Should power be removed while in SYNC menu
with invalid settings chosen, the ACL 204 will power up with the last valid configuration.
