Version 1.0
©Copyright 2017, Ambient LLC. All Rights Reserved.
Page 19
5.8.5
Temperature and Humidity Measurements Limits
When temperature is below -40 °C, (-40 °F), the LCD will display “Lo”. If temperature is above 80 °C
(176 °F), LCD will display “HI”.
When humidity is below 1%, the LCD will display “Lo”. If humidity is above 99%, the LCD will display
“HI”.
5.9 Wind
The wind section displays wind speed (gust or average), current wind direction, predominant wind
direction (over the last 5 minutes), and wind speed level.
Figure 19
5.9.1
Average Wind Speed vs. Wind Gust
To change the display between average wind speed and wind gust, press the WIND button on the top
of the display.
The wind speed is the average calculated by the sensor array in the 12 second update period. The
wind gust is the maximum calculated by the sensor array in the 12 seconds update period, and then
passed to the console. Thus, you never miss a wind gust.
5.9.2
Wind Units of Measure and Wind Direction Format
While in normal mode, perform the following operations to change the wind settings.
Command
Mode
Settings
[WIND]
+ 2
seconds
Enter Wind Settings
Wind Speed Units of Measure
Press
[ ]
to change between m/s → km/h →
knots → mph
[WIND]
Wind Direction Format
Press
[ ]
to change between degrees (0-360°)
and 16-point compass direction.
[WIND]
Exit Wind Settings
[WIND]
+ 2 seconds means press and hold the
WIND
button on the top of the display for two
seconds.
Wind speed reading