7
5.3.5 Install the Funnel Coil Filter
To install the funnel coil filter, press the coil until the hook is inside the hole at the bottom of the funnel, and locked in
place. The spring tension will keep the filter sit tight on the funnel.
Figure 7
5.3.6 Install Batteries
Insert 2 x AA batteries in the battery compartment. The LED indicator on the back of the transmitter will turn on for four
seconds and normally flash once every 16 seconds (the sensor transmission update period).
Figure 8
Figure 9
Note:
If no LED light up or is permanently on, make sure the batteries are inserted the correct way or a proper reset has
happened. Do not install the batteries backwards. You can permanently damage the outdoor sensor
Note:
We recommend 2 x AA Energizer lithium batteries for cold weather climates, but alkaline batteries are enough for
most climates. We do not recommend rechargeable batteries. They have lower voltages, they do not operate well at wide
temperature ranges, and do not last as long, resulting in poorer reception.