35
1
Remove the battery door on the back of the transmitter(s) by sliding down the battery door, as shown in Figure 3
Figure 32
2
BEFORE
inserting the batteries, locate the dip switches on the inside cover of the lid of the transmitter.
3
Channel Number:
This item supports up to eight transmitters. To set each channel number (the default is
Channel 1), change Dip Switches 1, 2 and 3, as referenced in Figure .
4
Temperature Units of Measure:
To change the transmitter display units of measure (°F vs. °C), change Dip
Switch 4, as referenced in Figure .
Switch in down position. Switch in up position.
Figure 33
5
Insert two AA batteries.
6
Verify the correct channel number (CH) and temperature units of measure (°F vs. °C) are on the display, as
shown in Figure .