Version 2.1
©Copyright 2015,
Page 10
units from Celsius to Fahrenheit.
10.
Indoor Temperature Calibration
(default is measured indoor temperature).
Press the
SET
key to adjust the indoor temperature. Press the
+
key or
MIN/MAX
key to adjust the
temperature up or down in 0.1 degC (0.18 degF) increments.
To view the uncalibrated value, press the
ALARM
key while the temperature is flashing.
Reference Section
4.2.5
Setting Calibrated Temperature
for more details on this function.
11.
Indoor Humidity Calibration
(default is measured indoor humidity).
Press the
SET
key to
adjust the indoor humidity. Press the
+
key or
MIN/MAX
key to adjust the relative humidity
up or down in 1% increments.
To view the uncalibrated value, press the
ALARM
key while the humidity is flashing.
Reference
4.2.4 Setting Calibrated Humidity
for more details on this function.
12.
Outdoor Temperature Calibration
(default is measured outdoor temperature).
Press the
SET
key to adjust the outdoor temperature. Press the
+
key or
MIN/MAX
key to adjust the
temperature up or down in 0.1 degC (0.18 degF) increments.
To view the uncalibrated value, press the
ALARM
key while the temperature is flashing.
Reference Section
4.2.5
Setting Calibrated Temperature
for more details on this feature.
13.
Outdoor Humidity Calibration
(default is measured outdoor humidity).
Press the
SET
key
to adjust the outdoor humidity. Press the
+
key or
MIN/MAX
key to adjust the relative
humidity up or down in 1% increments.
To view the uncalibrated value, press the
ALARM
key while the humidity is flashing.
Reference
4.2.4 Setting Calibrated Humidity
for more details on this function.
14.
Barometric Pressure Display Units
(hPa or inHg). Press the
SET
key again to toggle the
pressure units between hPa or inHg.
15.
Relative Pressure Calibration
(default is 29.92 inHg). Press the
SET
key to adjust the
relative barometric pressure. Press the
+
key or
MIN/MAX
key to adjust the relative
barometric pressure up or down. Reference
Section 4.5.6
for more details on this function.
16.
Pressure Threshold Setting
(default level 2). Press the
SET
key again to adjust the
pressure threshold setting. Press the
+
key or
MIN/MAX
key to adjust the pressure
threshold up or down. Reference
Section 4.5.4
for more details on this function.
17.
Storm Threshold Setting
(default level 4). Press the
SET
key again to adjust the storm
threshold setting. Press the
+
key or
MIN/MAX
key to adjust the storm threshold up or
down. Reference
Section 4.5.5
for more details on this function.
4.2.3
Setting
Barometric
Pressure
Note:
This is a continuation of the previous section. To enter this mode, you must start at the
beginning of this section.