background image

 

Version 1.0  

 

©Copyright 2015, Ambient LLC. All Rights Reserved. 

 

 

 

Page 13 

defective during the limited warranty period specified above.   
 
Replacement  parts  and  products  assume  the  remaining  original  warranty,  or  ninety  (90)  days, 
whichever is longer. 
 
The  owner  must  pay  any  shipping  charges  incurred  in  getting  your  Ambient,  LLC  product  to  a 
Ambient, LLC for replacement or repair. Ambient, LLC will pay reasonable return shipping charges to 
the owner of the product.   
   
Your  Ambient,  LLC  warranty  covers  all  defects  in  material  and  workmanship  with  the  following 
specified exceptions: (1) damage caused by accident, unreasonable use or neglect (including the lack 
of  reasonable  and  necessary  maintenance);  (2)  damage  resulting  from  failure  to  follow  instructions 
contained in your owner’s manual; (3) damage resulting from the performance of repairs or alterations 
by someone other than an authorized Ambient, LLC authorized service center; (4) units used for other 
than in the manner described in this manual. 

14

 

Disposal 

Please help in the preservation of the environment and return used batteries to an authorized depot.   
The  electrical  and  electronic  wastes  contain  hazardous  substances.  Disposal  of  electronic  waste  in 
wild country and/or in unauthorized grounds strongly damages the environment. 
 
The user is legally required to return used batteries and rechargeable batteries to any collecting point 
of  your  local  authority.  Disposing  used  batteries  in  the  household  waste  is  prohibited. 
Batteries/rechargeable  batteries  containing  hazardous  substances  are  marked  with  the  crossed-out 
wheeled bin. The symbol indicates that the product is forbidden to be disposed via the domestic refuse. 
The chemical symbols for the respective hazardous substances are Cd= Cadmium, Hg = Mercury, Pb 
= Lead. 
 

 

Summary of Contents for BC-3000














Reviews: