User bits (CAM ROLL Nr) can be set without altering Time
Generates all Framerates 24. 25. and 30. 29.97 in Drop, Nondrop modus
Set time/ user with ext. timecode, Ascii. or by hand with push buttons
Operation modi set by DIP swiches covered by battery slider
Dip switch Framerates overridden by hand setting or ext Timecode
1.1 LED indicators
RED LED blinks at one second intervals when the generator has not been set.On
switch on the generator starts from 00.00.00.00.
GREEN LED blinks at one second intervals when the generator has been set
successfully from Ascii ext. timecode or by Hand. When setting from external
timecode the LEDS change from red to green, the external timecode must be
withdrawn on the green phase,or Jam will repeat every 5 seconds.
When the red or green LED blinks in double time the battery has gone below a
predetermined value Change batteries. time is still OK
When the red LED is permanently on then the generator and microprocessor has
stopped running correctly. change batteries and reset.
1.2 Lemo socket. Pin assignment
Pin 1
GROUND
Pin 2
LTC in
Pin 3
ASCII In/Out, Tune
Pin 4
External supply 9 to 12 volts
Pin 5
LTC Out
1.3 Switches
Fr/sec 24 25 30 29.97
1
On
off
off
on
2
Off
off
on
on
3
On Drop Fr. Off Non Drop
4
On Reader Off Generator
5
On Display continuous
Off Display on for 5 secs
6
On First userbits then time
Off First time then user bits
7
On Buzzer on
Off Buzzer off
8
On Add frames 9-11
Off Subtract frames 9-11
Frs 0 1 2 3 4 5 6 7
9
1's 0 1 0 1 0 1 0 1
10
2's 0 0 1 1 0 0 1 1
11
4's 0 0 0 0 1 1 1 1
Binary Number 1.on 0. off
12 On. charge Nicads if fitted
