The dehydration process
17
3. Press the SET button to adjust the temperature.
The
°C
and
°F
symbol will light up.
4. Using the plus button and/or the minus button, set the desired temperature.
5. Start the operation by pressing the ON/OFF button
8
.
The ventilator will come on and warm air will be emitted through the hot air
outlet
6
.
Once the selected dehydration time has elapsed, the dehydrator will switch off
automatically.
During dehydration
The indicator in the display will switch between the remaining dehydration time and
the dehydration temperature every 5 seconds.
During the dehydration process, you can amend both the dehydration temperature
and the dehydration time.
1. Press the SET button
11
, if the mode which you want to change is displayed. The
indicator on the display
7
will begin to flash.
2. Change the dehydration time/the dehydration temperature respectively by
pressing the plus button
9
and/or the minus button
10
.
3. Wait until the notification in the display is no longer flashing to save the setting.
Replacing and turning the drying grid
− In order to guarantee even drying, replace and turn the drying grid
2
now and
again during the dehydration process.
Ensure that the drying grid without an opening in the middle is always on top.
− As the food on the lower grids is exposed to the hottest and driest air, position the
lower grid at the top and the upper grid at the bottom.
Pausing/stopping the dehydrating process
You can pause or stop the dehydration process at any time.
− In order to pause the dehydration process, press the ON/OFF button
8
briefly.
The display
7
will show the message
PA
.
Press the ON/OFF button again in order to continue the dehydration process.
− In order to stop the dehydration process, hold the ON/OFF button pressed in for
3 seconds.
The message
00
will show in the display.
Summary of Contents for XJ-14709C0
Page 3: ...3 A B 7 8 9 10 11 1 2 3 4 5 6 ...
Page 4: ...4 D C ...