The dehydration process
16
The dehydration process
Fill up the dehydrators
NOTICE!
Risk of damage!
Liquid may penetrate into conductive parts and damage them.
− Never add liquid to the dehydrators.
− Place fruits and vegetables on the drying grids
2
in such a way that warm air
can still circulate well.
− If you are using foods with different dehydration times, place the food with the
longest dehydration time on the lowest drying grid as the temperature is highest
there (see
Fig. C
).
− As far as possible, use the same types of food on all drying grids.
− Place fruit pieces upright and close to one another on the drying grid.
− Always place unpeeled fruit with the cut surface facing upwards on the drying
grid, unless a different recommendation has been made in a recipe.
− Place pieces which have been cut into slices in a scale-like formation on the
drying grid.
− Distribute the vegetables only in one position on the drying grid.
− Position the drying grids on top of one another in such a way that the teeth on
the drying grids fit into the designated holders on the underside of the drying
grids (see
Fig. D
).
Starting the dehydration process
The dehydration process can be displayed either in Celsius (°C) or in
Fahrenheit (°F).
− Hold the SET button
11
pressed in for 3 seconds in order to reach
the desired mode. The selected mode will be shown in the
display
7
.
1. Plug the mains plug
4
into a properly installed mains socket.
The indicator on the display on the control panel
5
will begin to flash
(see
Fig. B
).
2. Set the desired dehydration time using the plus button
9
and/or the minus
button
10
.
Summary of Contents for XJ-14709C0
Page 3: ...3 A B 7 8 9 10 11 1 2 3 4 5 6 ...
Page 4: ...4 D C ...
