Operating the appliance
17
5. Only connect the appliance to a properly installed power socket. The local mains
voltage must correspond to the technical data for the appliance.
If the operating light is red, the appliance is in standby mode.
6. Briefl y press the
14
button to switch on the appliance.
In operating mode, a beep will sound every time the sensor buttons are pressed.
7. To set the cooking time, press the
17
button until the timer fl ashes and use the
dial to set the hours (up to 99 hours).
8. Press the
17
button again and use the dial to set the minutes (up to 59
minutes).
9. To set the cooking temperature, press the
17
button. As soon as the
temperature display fl ashes, you can use the dial to set the temperature (0°C
- 95°C).
10. Press the
14
button to confi rm the settings.
The water begins to circulate and is heated. The operating light fl ashes blue during
this process.
The timer will begin to count down as soon as the water has reached the set cooking
temperature.
NOTICE!
Pay attention to the water level
The appliance has a built-in sensor that recognises whether
the water level has dropped below the MIN
9
mark. If there is
no or too little water in the pot, a beep will sound and the error
code EE1 appears on the display. The appliance switches itself off
automatically.
If necessary, top up the water so that the water level is always
between the MIN
9
and MAX
7
marks and then switch on the
appliance again.
Please note that topping up the water may lower the temperature
of the water and the appliance will need to reheat it to the set
temperature.