1.
Minimum distance from the front of the lamp to combustible
surfaces is 8”.
2.
Make sure all connections are tight.
WARNING: Use of other manufacturers components will void warranty, and
create a potential safety hazard.
CAUTION - RISK OF FIRE: KEEP AWAY FROM
COMBUSTIBLE MATERIALS.
DIMMING HALOGEN LAMPS GREATLY REDUCES LAMP LIFE.
IMPORTANT SAFETY INSTRUCTIONS
Lighted lamp is HOT!
WARNING - To reduce the risk of FIRE or INJURY TO PERSONS:
Turn off/unplug and allow to cool before replacing lamp.
Lamp gets HOT quickly! Contact only switch/plug when turning on.
Do not touch hot lens, guard, or enclosure.
Keep lamp away from materials that may burn.
Do not touch the lamp at any time. Use a soft cloth. Oil from skin may
damage lamp.
Do not operate the luminaire fitting with a missing or damaged shield.
SAVE THESE INSTRUCTIONS
INSTALLATION AND SAFETY INSTRUCTIONS
WARNING
: Be sure the electricity to the system you are working
on is turned off; either the fuse removed or the circuit breaker set
at off.
IF YOU ARE UNCLEAR AS TO HOW TO PROCEED, CONTACT
A QUALIFIED ELECTRICIAN.
FOR USE WITH THE 120V TRANSITION TRACK SERIES BY
SEA GULL LIGHTING.
CAUTION – To reduce the risk of a burn during relamping,
remove from the track before relamping.
FOR YOUR SAFETY
IMPORTANT SAFETY INSTRUCTIONS
FIGURE 1
LR-016
070506
www.SeaGullLighting.com
RAIL ADAPTER
SHADE
