1.
Install shade over threaded socket assembly and secure in
place with retaining ring.
2.
Remove cap from rail adapter on track head.
3.
Align contacts on track head to conductors on rail.
4.
Install fixture to rail by closing adapter over rail. (see fig. 2)
5.
Install cap over top of rail adapter and secure cap set screw.
6.
Tighten ground set screw on adapter so it sits in groove of rail.
7.
Install lamp and thread glass enclosure over lamp.
(see fig. 3)
ATTACH TRACK HEAD TO RAIL (Fig. 2) LR-016
MRC 16
VERSION
T4
VERSION
MRC 16
VERSION
T4
VERSION
MRC 16
VERSION
T4
VERSION
MRC 16
VERSION
T4
VERSION
MRC 16
VERSION
T4
VERSION
FIGURE 3
(OPTIONAL)
ADJUST REFLECTOR
BACK & FORTH FOR
VARIOUS BEAM
DIAMETERS OR USE
WITH OUT REFLECTOR
FOR A GENERAL LIGHT
SOURCE
SOCKET ASSEMBLY
LAMP
SUPPLIED
GLASS
SHIELD
REFLECTOR
(OPTIONAL)
REFLECTOR USED TO ADJUST DIRECTIONAL BEAM SPREAD
FIXT-INST.
INCORRECT
FIXT-INST.
CORRECT
FIXT-INST.
INCORRECT
FIXT-INST.
CORRECT
FIGURE 2
CORRECT
INCORRECT
TRACK HEAD INSTALLATION
CAP SET
SCREW
GROUND
SET
SCREW
GROUND
SET
SCREW
