The streaming audio cannot be decoded by Windows Media Player®. However, a program
called VideoLAN® (
) can be used to decode the Ethernet stream.
Playback after a power loss
Audio will resume after a power loss to the receiver. The audio will NOT resume from where
it was at the time of the power loss, but rather where it would be if the power had not been
lost. The following is an example of what you would hear.
1. A program was started at 9:00:00
2. At 9:09:45 power was lost to the receiver and audio terminated
3. Power was restored at 9:11:20
4. The AMR-100-I, after rebooting, will resume audio at approximately 9:11:50
5. The audio will play what was supposed to be playing at 9:11:50 had the power not
been lost
Thus, the audio playing after power is restored, would be 11:50 into the program and the
program will end at its scheduled time. A 25-minute program will end at 11:25.
Rev. 1 – Firmware version 2.03
36
©
2012