DETAILED DESCRIPTION AND OPERATIONS
Front Panel Description
The front panel display gives the status of the receiver. The main screen shows relays, audio
output, and the status of the RF and Ethernet (see
section).
Front Panel Buttons
To the right of the display are four buttons:
[UP] arrow
[BACK]
[DOWN] arrow
[ENTER]
The [UP] and [DOWN] arrow changes the display from its status screen to informational and
setup screens. Pressing [ENTER] will put you to a settings screen. Pressing the [UP] and
[DOWN] arrows will show you the current settings. Pressing [ENTER] will allow you to
change settings and [BACK] will return to the previous screen. It also will save any changes
you made.
Emergency or “one off” program arming
To be able to receive an emergency or a special “one off” programs, TMAP7 must armed
and
. To arm it, press and hold the [BACK] button until an “*” appears in the upper
left of the screen. You must do this from main screen.
TMAP7 must also be
to a physical
and not used as a target in a playlist.
To release it, press and hold the [BACK] button
until the “*” goes away.
Rev. 1 – Firmware version 2.03
17
©
2012