6.2 Adjusting the 3-point mounting frame
The 3-point mounting frame is adjusted to the catch
hooks of the tractor using the spacer discs
2
.
NOTE
The ball sleeves
1
can only be used with Cat. 3
pins
3
.
CMS-I-00003055
Lower link catch hook
Spacer discs [mm]
Cat. 3
t=13.5
Cat. 4
t=6.5
Top link catch hook
Spacer discs [mm]
Cat. 3
t=6.5
Cat. 4
Without spacer disc
1.
Determine the spacer discs according to the
catch hooks on the tractor.
2.
Install the ball sleeves and spacer discs.
6.3 Installing the universal joint shaft on the implement
NOTE
The tractor symbol on the universal joint shaft
identifies the tractor-side connection.
1.
Clean and grease the drive shaft on the
implement.
2.
Make sure that the universal joint shaft guard is
functional.
CMS-T-00004040-A.1
CMS-T-00004596-A.1
6 | Preparing the machine
Adjusting the 3-point mounting frame
MG6750-EN-II | C.1 | 21.07.2021
50
Summary of Contents for KG 6002-2
Page 1: ...Original operating manual Rotary cultivator KG 6002 2 SmartLearning www amazone de...
Page 6: ......
Page 117: ......
