Amazone KE 3002, Original Operating Manual

Page: 72 / 120

6.5.10 Preparing the coupling parts for operation
6.5.10.1 Adjusting the lower link catch hook
1. Loosen the nuts
1
and remove them.
2. Remove the bolts
3
.
NOTE
The closer the seed drill is attached behind the
roller, the lower the lifting force requirement.
3. Move the lower link catch hooks
2
into the
desired position.
4. Install the bolts.
5. Install the nuts and tighten them.
6. After 5 hours of operation, check the bolt
connection for tight fit.
2
3
1
415 Nm
CMS-I-00003376
6.5.10.2 Coupling the seed drill
1. Remove the linch pin
1
.
2. Remove the pin
2
.
3. Open the locking straps
3
.
2
3
1
CMS-I-00003377
CMS-T-00004772-A.1
CMS-T-00004774-A.1
CMS-T-00004779-A.1
6 | Preparing the machine
Preparing the implement for operation
MG6878-EN-II | D.1 | 18.05.2021 66