Amazone KE 3002, Original Operating Manual

Page: 63 / 120

NOTE
The adjustment of the working depth must be
adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
5. Move the levelling board
2
to the desired
position.
The locking mechanism engages.
6. Put the universal operating tool in the parking
position.
6.5.4 Adjusting the working depth of the rigid side guide plates
The rigid side guide plate ensures that the tilled soil is
not thrown to the side. The working depth of the side
guide plate is adjustable.
1. Loosen and remove the nuts
2
.
Work application Working depth
After the plough
-
The side guide plates glide
through the soil at a depth of 1
to 2 cm
For mulch seeding
with coarse organic
residues
+
Install the side guide
plates slightly higher at the
front to allow crop residues to
pass underneath.
NOTE
The adjustment of the working depth must be
adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
2. Move the side guide plate
1
to the desired
position.
3. Install the nuts and tighten them.
4. Make the same setting for the opposite side of the
implement.
5. After 5 hours of operation, check the bolt
connection for tight fit.
+
-
1
2
CMS-I-00003449
CMS-T-00004836-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6878-EN-II | D.1 | 18.05.2021 57