6.2.6 Coupling the ball hitch coupling or drawbar eye
6.2.6.1 Coupling the drawbar eye
1.
Open the stop tap on the hydraulic drawbar.
2.
Adjust the height of the hydraulic drawbar using
the "yellow" tractor control unit.
3.
Drive the tractor towards the implement.
4.
Couple the drawbar eye with the clevis coupling
of the tractor.
CMS-I-00003557
6.2.6.2 Coupling the ball hitch coupling
1.
Open the stop tap on the hydraulic drawbar.
2.
Drive the tractor towards the implement.
3.
To rest the ball hitch coupling on the hitch ball,
lower the hydraulic drawbar using the "yellow"
tractor control unit.
CMS-I-00003558
6.2.6.3 Swivelling up the jack
1.
To unload the jack,
Slightly lift the implement using the "yellow"
tractor control unit.
2.
Pull out the linch pin from the pin.
3.
Pull out the pin.
4.
Swivel up the jack.
5.
Insert the pin.
6.
Secure the pin with a linch pin.
CMS-I-00003552
CMS-T-00004302-C.1
CMS-T-00004305-C.1
CMS-T-00004306-C.1
CMS-T-00004303-C.1
6 | Preparing the machine
Coupling the implement
MG7478-EN-GB | C.1 | 19.08.2022 | © AMAZONE
48
