Amazone Certos 4001-2TX, Operating Manual

Page: 81 / 110

Use of the machine
Certos BAG0111.10 04.18 81
10.1 Transport to working position
WARNING
Instruct people to leave the swivel area of the machine wing be-
fore you fold the machine wing out or in.
The execution of some hydraulic functions can take a little longer.
Make sure that the hydraulic cylinders are able to move in and out to
the limit of their stop positions.
10.1.1 Changing from transport to working position
1. Take off the protective tarpaulins and fasten them on the imple-
ment.
2. Open the stop tap on the drawbar cylinder (Position 1)
3. Actuate the tractor control unit yellow .
→
Lift out the implement in headland setting.
4. Pull the cable pull to unlock the safeguard that protects against
undesired unfolding.
and simultaneously
5. actuate the tractor control unit blue .
→
unfold the implement.
6. Certos 7001-2TX : Put the side elements into working position.
7. Actuate the tractor control unit yellow .
→
Lower the implement into working position.
→
Completely raise the running gear.
8. Operate the tractor control unit in float position during field oper-
ation.
10.1.2 Changing from working to transport position
WARNING
Instruct people to leave the swivel area of the machine wing be-
fore you fold the machine wing out or in.
Observe maximum transport height of 4 m!
Certos 7001: To do so, fold the side elements into transport postion.
The execution of some hydraulic functions can take a little longer.
Make sure that the hydraulic cylinders are able to move in and out to
the limit of their stop positions.