Amazone Certos 4001-2TX, Operating Manual

Page: 73 / 110

Coupling and uncoupling the machine
Certos BAG0111.10 04.18 73
Couple the implement with ball bracket on the tractor ball head
1. Instruct persons to get out of the danger area between the trac-
tor and the implement.
2. First couple the supply lines before coupling the implement to
the tractor.
2.1 Drive tractor up to the implement in such a manner that a
free space (approx. 25 cm) remains between tractor and
implement.
2.2 Secure the tractor against unintentional starting and rolling
away.
2.3 Couple supply lines to the tractor.
3. Drive the tractor in reverse to the implement so that the coupling
device can be coupled.
4. Place the control valve on the drawbar in the posi-
tion.
5. Open the stop tap on the drawbar (Position 1)
6. Actuate the tractor control unit yellow .
→
Lower drawbar.
7. Couple the coupling device.
8. Bring the control valve on the drawbar into position.
9. Close the stop tap on the drawbar (Position 0).
10. Lift the stand into transport position.
11. Remove wheel chocks
12. Release the parking brake.
7.2 Uncoupling the machine
DANGER
Danger of injury from coulters breaking and coulter pieces being
ejected!
Do not rest the implement on the tines!
Park the folded implement with running gear and jack on a level park-
ing surface with solid ground.
When uncoupling the machine, there must always be enough space
in front of the machine, so that you can align the tractor with the ma-
chine if necessary.