Cleaning, maintenance and repairs
114
Catros-2TX BAG0159.8 02.20
12.10 Aligning the disc gangs relative to each other
It may be necessary to align the disc gangs
•
to adjust the working depth of the two disc
gangs relative to each other.
•
to prevent lateral pull on the implement.
•
to compensate for different degrees of wear
in the disc gangs.
Adjusting the disc gangs relative to each
other using the spindles.
Adjust both spindles for a disc segment together.
1. Align the unfolded implement horizontally.
2. Set the working depth to the smallest value.
→
The discs are not standing on the ground.
3. Secure the tractor against unintentional
starting and unintentional rolling away.
4. Loosen the lock nut and adjust the spindle
length, retighten the lock nut.
→
Adjust the spindles to the same length.
12.11 Replacing or turning the cutters of the cutting roller
The cutters of the cutting roller have blades on
both sides.
This means that worn blades can be turned
once.
