Cleaning, maintenance and repairs
Catros-2TX BAG0159.8 02.20
113
12.8.2 Mounting tyres (workshop work)
•
Remove any outbreaks of corrosion from the wheel rim seating
surfaces before fitting a new/another tyre. Corrosion can cause
damage to the wheel rims when the vehicle is in operation.
•
When fitting new tyres, always use new valves for tubeless tyres
or new inner tubes.
•
Always fit the valves with valve caps which have a gasket insert.
12.9
Replacing discs (workshop work)
Replace if minimum diameter 360mm
The discs are replaced with
•
the machine folded out
•
the discs raised
•
the machine secured against unintentional
lowering
To replace the discs, release the four screw un-
ions and then retighten.
