Amazone Catros 4001-2TS Operating Manual Download Page 45

Page: 45 / 90

Structure and function

Fig. 20

(1)  Knife holder raised
(2)  Knife holder lowered
(3)  Adjustment screw with lock nut

→

After adjusting, lock the bolts with a lock

nut!

(1) Fastening bolts of the knife holder.
(2) Stop bolt for the blade

The fastening bolts of the knife holder shear in

event of overload. The stop bolt can be tempo-

rarily used as a replacement.
Fastening bolt:
Round-headed bolt 603 10X 25 8.8 A2G.

Fig. 21

Risk of blockage with new installation of the arms on the knife holder.

The arms of the knife holder must be installed on the profile of the

roller frame so that they are not located in the soil flow of the levelling

unit.

Border blade (optional)

Border blades generate an improved work pat-

tern in the border and intermediate areas.
Assembly / Disassembly:
  1.  Remove the linch pin on the last blade.
  2.  Pull the last blade out to the front.
  3.  Insert the border blade into the tube.
  4.  Position the border blade with blade and

secure with the linch pin.

Fig. 22

Catros BAG0081.10 09.14

Summary of Contents for Catros 4001-2TS



























































































Search results

Summary of Contents for Catros 4001-2TS

Reviews:

Amazone Catros 4001-2TS, Operating Manual, Page: 45 / 90

Search results

Summary of Contents for Catros 4001-2TS

Reviews: