Amazone AMADOS E+S Operating Manual Download

Page: 31 / 32

Cleaning, maintenance and repairs

AMADOS BAG0083.2 11.17

Cleaning, maintenance and repairs

8.1

Cleaning

CAUTION

Take great care when cleaning the

E+S

with a high-pressure

cleaner.

Never clean the setting motor with a high-pressure cleaner, as
this could damage the setting motor!

8.2

Storage

Store the board computer in a dry environment when removing it from
the tractor cab.

8.3

Service menu

To limit a possible malfunction, the input of data can be indicated on
the display.

1. Actuate the

and

keys simultaneously.

→

Input E1 is displayed.

2. Actuate the

keys.

→

To display the inputs E1 to E3

3. Actuate the

key.

→

Back to work display

Display, input 1

Wheel impulses

The impulses from the distance sensor or the signal socket of the
tractor are counted.

Analogue value of rate
slider

Actuate the

key.

→

Setting motor moves, voltage at sensor is displayed
(0.5V -4.5 V).

Analogue value of bor-
der spread deflector

Actuate the

key.

→

Setting motor moves, voltage at sensor is displayed
(0.5V -4.5 V).

Summary of Contents for AMADOS E+S

































Search results

Summary of Contents for AMADOS E+S

Reviews:

Related manuals for AMADOS E+S

Brands by name

Popular brands

Amazone AMADOS E+S, Operating Manual

Search results

Summary of Contents for AMADOS E+S

Reviews:

Related manuals for AMADOS E+S

Brands by name

Popular brands