12
• Place the filter back into the cover and slide it back in.
9
Cleaning the HEPA Filter
• Lift the exhaust grid to remove it.
• Take out the HEPA filter .
• Rinse the filter under cold water.
• Dry it afterwards.
• Refit it to its original position.
• Reinstall the exhaust grid until it clicks in place.
NOTICE
Never use the appliance without filters installed. This can
cause power loss or damage to the appliance.
Troubleshooting
Problem
Solution
The appliance does not start.
• Connect the power plug properly.
• Check if the electrical outlet is powered.
• Check if the on/off switch is on.
Weak suction power.
• Check if the flexible hose, extension tube or
any of the accessories are obstructed.
• Remove and clean the filters.
Motor is abnormally noisy.
• Stop using the appliance immediately.
• Check if the hose, tube or any of the
accessories are obstructed.
• Remove the obstruction.
• If the noise continues, power off the appliance
and disconnect the power plug.
• Contact your service agents.
6
