15
EN
NOTICE
Risk of damage!
Do not measure
motors with unstable power. Large voltage surges
may occur that can damage the product.
• Set the function switch (C) to the appropriate
voltage measurement mode:
Voltage
Function switch (C) position
≤
200 mV
200 mV
≤
2000 mV
2000 mV
≤
20 V
20 V
≤
200 V
200 V
≤
600 V
600 V
• Insert the black connector lead (L) into the
COM
input jack (E).
• Insert the red connector lead into the
V/Ω/mA
input jack (G).
• Connect the test probes (L) in parallel to the
circuit under test.
• The stabilized value on the display (A) is read as
the actual reading.
