18
EN
• For current measurements of up to
200 mA
,
set the function switch (C) to the
200 mA
position and insert the red plug connector lead
into the
V/Ω/mA
input jack (G).
• For current measurements of up to
10 A
, set
the function switch (C) to the
10 A
position
and insert the red plug connector lead into the
10A
input jack (D).
• Turn off the power to the circuit under test.
Break the connection line/track and separate
the 2 points where the flow of current must be
measured.
• Connect in series by attaching securely the
test probes (L) each at the 2 open points of the
track/line.
• Apply power to the circuit.
• The stabilized value on the display (A) is read as
the actual reading.
Resistance measurement
WARNING
Risk of electric shock!
To avoid
electric shock, disconnect power from the unit
under test and discharge all capacitors before
taking any resistance measurements. Remove the
batteries or unplug. Resistance measurements are
taken with no electricity running in the circuit.
