AMAZON COMMERCIAL B07RV85KCV, Manual

Page: 7 / 34

Step 4:
INSTALL STRIKER PLATE
A B
•
•
Measure one half of door thickness from door stop to mark
vertical center line of strike. Drill 1" (25.4mm) hole, 1/2" (12.7mm)
deep at intersection of horizontal and vertical center lines.
Close door to mark horizontal center line of strike.
•
Chisel out door jamb 1/16" (1.6 mm) deep or until strike plate
sits flush with door jamb.
•
Tighten screws securely.
C D
7