Amazing Box
62
Installation
Introduction
F
AQs
Quick Start
File Formats
Main Screen
Color Editor
Density Settings
(for GNC Designs Only)
Click
Options
, then
Density Settings
to bring up the
dialog box in Figure CE-10. Density Settings only
work with GNC designs.
Figure CE-10
In Figure CE-10 you will find two ways to adjust the
density of the embroidery pattern, “Adjust stitch
density” by percentage or by “Thread Weights.”
Figure CE-10a
The best way to “Adjust stitch density” is to
remember that if the number is higher than 100,
stitches will be added, and if the number is lower
than 100, stitches will be removed.
You may get better results on terry cloth by
changing the density to 110% and changing the
density to 90% for knits.
Ti
p
In “Thread Weight,” the default is 40 wt. When
selecting 60 wt, there will be an increase in
stitches due to the thickness of the thread being
thinner than 40 wt. If “Yarn” is selected, there
will be fewer stitches.
