manualshive.com logo in svg

Amantii ZECL-31-3228-STL, Installation And Operation Instructions Manual, Page: 2 / 19

Share
Download
Amantii ZECL-31-3228-STL Installation And Operation Instructions Manual Download Page 2

 

2 

TABLE OF CONTENTS 

Please read and carefully follow all of the instruction found in this manual. Please pay special 

attention to the safety instructions provided in this manual. The instructions included here will 

as  sure  that  you  have  many  years  of  dependable  and enjoyable  service  from  your  Amantii 

product. 

 

 

IMPORTANT INSTRUCTIONS....................................................................................................................... 3 

UNPACKING AND TESTING APPLIANCE .................................................................................................... 4 

GROUNDING APPLIANCE ............................................................................................................................ 4 

LOCATING THE FIREPLACE ........................................................................................................................ 4 

CLEARANCES WHEN BUILT-IN ................................................................................................................... 5 

ZECL-31-3228-STL ........................................................................................................................................ 6 

INSTALLATION OVERVIEW 

–

ZERO-CLEARANCE (METAL) FIREPLACES .............................................. 9 

HARD- WIRE INSTALLATION...................................................................................................................... 10 

MEDIA OPTIONS ......................................................................................................................................... 11 

DECORATIVE MEDIA INSTALLATION ........................................................................................................ 11 

OPERATION ................................................................................................................................................. 12 

MANUAL OPERATION................................................................................................................................. 12 

REMOTE CONTROL OPERATION.............................................................................................................. 13 

INSTALLING WALL THERMOSTAT ............................................................................................................. 14 

REPLACEMENT PARTS .............................................................................................................................. 15 

EXPLODED VIEW ........................................................................................................................................ 16 

TROUBLE SHOOTING ................................................................................................................................ 17 

SERVICE HISTORY ..................................................................................................................................... 18 

WARRANTY ................................................................................................................................................. 19

 

Summary of Contents for ZECL-31-3228-STL




















Reviews:

No comments